Battery Tender 021-1162 Solar Panel Charger Controller Review
Battery Tender 081-0148-25-BG4 25' Extension Cable - Pack of 4 Review
NOCO Genius G3500 6V/12V 3.5A Automatic Multi-Purpose Battery Charger and Maintainer (Grey) Review
24 Volt SLA Battery Float Charger, 1.2 Amp (1200ma), with Alligator Clip, 24V Battery Tender Review
Deltran Battery Tender Jr 12v Motorcycle ATV Charger Review
Schumacher SC-10030A SpeedCharge Automatic Charger and Maintainer Review
The Schumacher SC-10030A SpeedCharge Battery Charger/Maintainer with 100-amp Engine Start is a versatile, fast and efficient battery charger/maintainer suitable for use with a variety of 6-volt and 12-volt lead-acid battery types used in everything from tractors, motorcycles, stand-up PWCs and snowmobiles, to those found in cars, trucks, SUVs and RVs. It features fully automatic microprocessor control; automatic multi-stage charging allowing for ease of use; two charge rates: 2-amp and 12<>30-amp; and the ability to choose the type of battery being charged. Additional features include 100-amps of built-in AC powered jumpstarter power, along with battery tester and alternator tester functionality.
By combining conventional battery charging technology with state-of-the-art circuitry, the Schumacher SC-10030A SpeedCharge Battery Charger/Maintainer offers versatility, speed of charging and convenience rarely seen in a battery charger. The charger features an easy-to-use and monitor touchpad on which two output current rates are selectable: 2-amp and 12<>30-amp. The touchpad also allows for the selection of battery type being charged: 12-volt regular automotive, 12-volt deep-cycle, 12-volt AGM or gel cell and 6-volt regular batteries; and provides data percentages of a full charge that is stored. All these features and data are heightened by the prescence of a powerful microprocessor at the heart of the unit.
The microprocessor of the Schumacher SC-10030A SpeedCharge Automatic Charger and Maintainer monitors the attached battery's voltage level from the moment it is connected, using this ever-changing data to improve the charging system's multi-stage charging cycle. Multi-stage charging allows a battery charger to automatically cycle, between a variety of charging phases including desulfation, bulk charging, absorption, monitoring, float mode and a minimal drip charge maintain mode when a connected battery again falls below a certain set level. The microprocessor collected data is especially important in this cycle in that with it the SC-10030A can more accurately measure the charging needs of a connected battery, resulting in quicker charge times and a lessened chance of damage due to overcharging.
An additional key to the speed with which the Schumacher SC-10030A SpeedCharge Automatic Charger and Maintainer works is its 2 available charging rates: 2-amp and 12<>30-amp. By allowing users to choose the best rate for the right battery type and charging needed the SC-10030A is better able to supply exactly the right level of charge, at the right time in the charging cycle to get quick results and maintain connected batteries at theie proper levels. Details on the three available charging rates include:
In addition to serving as a battery charger the Schumacher SC-10030A also contains several automotive diagnostic tools that come in handy in any garage. These include: an AC powered battery jumpstarter, a built-in battery tester and an built-in alternator tester.
Your Schumacher SC-10030A battery charger can be used to jump start your vehicle using the built-in "engine start" feature if the battery is low. This feature is capable of delivering up to 100-amps of jumpstarting power via your household AC current.
Schumacher SC-10030A battery charger has a built-in battery tester that displays either an accurate battery voltage or an estimate of the battery’s relative charge based on the battery voltage and the Battery Council International scale.
Th built-in alternator tester displays either an accurate alternator voltage or an estimate of the alternator's relative output compared to normal alternators. The Alternator % values displayed should be taken as general reference, not precise diagnosis.
Schumacher Electric Corporation (the "Manufacturer") warrants this battery charger / maintainer for five (5) years from the date of purchase at retail against defective material or workmanship that may occur under normal use and care. If your unit is not free from defective material or workmanship, Manufacturer’s obligation under this warranty is solely to repair or replace your product with a new or reconditioned unit at the option of the Manufacturer. It is the obligation of the purchaser to forward the unit, along with proof of purchase and mailing charges prepaid to the Manufacturer or its authorized representatives in order for repair or replacement to occur.
Since 1947, Schumacher Electric Corporation has been leading change and driving performance to exceed its customers' expectations. Engineered patent pending technologies and award winning marketing allows Schumacher to be the brand of choice when it comes to portable power and battery charger/jump starter/maintainer/tester needs. Passion and commitment is the Schumacher way which shows, as they are NASCAR's official supplier for chargers, jump starters, and inverters.
12v Battery Tender Junior Review
NOCO Genius G750 6V/12V 750mA Fully Automatic Battery Charger and Maintainer (Grey) Review
Keep your vehicle batteries charged and maintained with ease using the NOCO G750. This fully automatic charger is designed to be used with small batteries, from 1.2Ah to 30Ah, such as those found in motorcycles, ATVs, jet skis, and snowmobiles. It can also effectively maintain 6V or 12V batteries in larger vehicles like cars, trucks, boats, and RVs. The G750 uses a thorough five-step process to charge and maintain your battery and features a switch-mode design, resulting in a charger that's small and lightweight.
The NOCO G750 uses a five-step process to charge and maintain your battery. First, it checks your battery's voltage to make sure that the connections are good and that the battery is in stable condition before beginning the charge process. Second, it begins a bulk-charging process with a gentle (soft) charge. Third, it continues bulk-charging and returns 90 percent of the battery's capacity.
Fourth, it brings the charge level to 100 percent by delivering small amounts of current to provide a safe, efficient charge and limit battery gassing. And fifth, it monitors the battery voltage to determine whether a maintenance charge should be initiated. The maintenance cycle is repeated to keep the battery at full charge, without overcharging, and the charger can be left connected indefinitely.
The NOCO G750 features a high-frequency, high-efficiency switch-mode design, resulting in a charger that's compact and lightweight. An auto-memory function returns the charger to the last selected mode when you restart it. Thanks to NOCO's Rapid Charging Technology, the G750 charges batteries two times faster than traditional linear battery chargers. With Abnormality Protection, the charger automatically shuts off if it's been left in bulk charge mode for an extended period of time. The charger is also designed to adjust automatically to changing current needs and prevent reverse polarity, short circuits, open circuits, sparks, overheating, over-currents, and overcharging.
The NOCO G750 comes equipped with a VosFX smart processor that alters the charge process based on organic feedback from the battery to extend the battery life. The processor quickly and efficiently makes decisions on how to charge the battery without risking your safety or damage to the battery.
The NOCO G750 features battery clamp connectors that are ergonomically designed to make battery connecting and disconnecting simple. Fully insulated over-mold casings with strain relief ends alleviate unwanted tension on cable leads.
An interchangeable connector allows accessories to be properly mated and fastened with a snap-lock latch. Each battery connection accessory features an over-molded inline fuse to increase your safety by protecting the battery charger from potentially dangerous short circuits.
The charger measures 1.3 by 4.5 by 2.7 inches (H x W x D) and weighs 0.5 pounds. It features a rugged polymer enclosure built for high-impact resistance--making the charger well suited for harsh or demanding work environments.
The NOCO G750 battery charger and maintainer is backed by a five-year limited warranty.
 | 6V/12V CompatibilityCharges 6V and 12V batteries |  | Auto-MemoryReturns to last selected mode when restarted |
 | Fully InteractiveAutomatically adjusts itself to changing current needs |  | Designed for SafetyReverse polarity, short circuit, open circuit, spark-proof, overheating, overcurrent, and overcharging |
 | Switch-Mode DesignHigh-frequency, high-efficiency design for a lightweight, compact charger |  | Rapid Charging TechnologyCharges batteries two times faster than traditional linear battery chargers |
 | Variable Input Compensated100 percent full charge even with varying A/C input voltages |  | Multiple Battery ChemistriesSafely charges Wet, Gel, MF, and AGM batteries |
 | Abnormality ProtectionAutomatically shuts off if the charger remains in bulk charge mode for an extended period |  | Extendable ConnectorsPlug-and-play connectors for easy accessory changes |
NOCO G750 battery charger and maintainer, battery clamp connectors, eyelet terminal connectors, owner's manual, and user guide.
This is a smart, 5 Step, fully automatic switch-mode battery charger and maintainer. The is best for small battery applications such as charging your Motorcycle, ATV, Jet Ski or Snowmobile. It can effectively maintain any 6 volt or 12 volt batteries in larger applications, such as cars, RVs, boats and trucks. NOCO's battery chargers are fortified with several unique safety features to protect you, your battery and the battery charger. The VosFX processor is a smart processor utilizing sophisticated levels of intelligence to alter the charge process based on organic feedback from the battery to extend battery life. The processor quickly and efficiently makes decisions on how to charge the battery without risking user safety or damage to the battery. Rugged enclosure is made from a rugged polymer for high-impact resistance for some of the harshest and most demanding working environments. Comfort cable clamps are ergonomically designed to make battery connecting and disconnecting effortless. Features a fully insulated over-mold casing with strain relief ends to alleviate unwanted tension on cable leads. Each battery connection accessory features an over-molded inline fuse to increase user safety by protecting the battery charger from potentially dangerous short circuits. A uniquely designed interchangeable connector allows accessories to be properly mated and fastened with a snap-lock latch. Returns to last selected mode when restarted. Automatically adjusts itself to changing current needs. High-frequency, high-efficiency for a lightweight, compact charger. 100 per cent full charge even with varying A/C input voltages. Automatically shuts off if charger remains in bulk charge mode for an extended period of time. Plug-n-play connectors for easy accessory changes. The box includes a charger, battery clamp connectors, eyelet terminal connectors, owner's manual and user guide, product registration card. It is ETL approved for US and Canada and is RoHS compliant.
Schumacher PS-1562A DSR ProSeries 1.5 Amp 6/12 Volt Automatic Battery Charger/Maintainer Review
Battery Tender 021-0133 12V 5-Bank Commercial Battery Management System Review
The Battery Tender 12-volt/2-amp 5-Bank Battery Management System is designed for use by commercial and serious vehicle enthusiasts who need the ability to fully charge up to five 12-volt batteries simultaneously and maintain each at its proper storage voltage without the damaging effects caused by some trickle chargers. Compatible with all AGM (absorbed glass mat), sealed maintenance free and flooded batteries commonly found in everything from some automotive/farm equipment to motorcycles, ATV’s, and personal watercraft, this lightweight, microprocessor controlled unit provides safe, constant, 4-step charging current for every vehicle stored in your shop.
The first fully automatic, constant-current battery charger designed to charge and/or maintain up to 5 12-volt batteries simultaneously at 2 amps, the Battery Tender 12-volt/2-amp 5-Bank Battery Management System utilizes a 4-step charging program (initialization, bulk charge, absorption mode and float mode), that allows users to connect the charger to up to five batteries, either in or out of a vehicle, with the confidence that all are being maintained at optimal performance levels. This makes it extremely useful for battery rotation, where a battery is removed from service during repair or in preparing batteries for sale. It is also safe for your batteries, with the built-in ability to automatically switch its output voltage to a storage or float level that eliminates the need to worry about the damaging effects of overcharging, and the resulting need to check on the condition of a charging battery. If or when the battery voltage drops too far under load, this same smart technology resumes output power and the charging cycle begins again. The unit also features sparkproof connectors, reverse polarity protection, a 72-hour safety timer that ensures batteries attain float mode status, an easy to understand charging status LED indicator for each charging bank, durable construction and almost no current draw from batteries connected to. Key Features:
Three-Year Limited Warranty | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Schumacher SE-1-12S Fully Automatic Onboard Battery Charger - 1.5 Amps Review
The Schumacher SE-1-12S Fully Automatic 1.5-amp Onboard Battery Charger is an AC powered automatic trickle charger / maintainer for use with 12 volt lead-acid batteries. The unit features an automatic charge cycling process that allows charging to turn on and off automatically as is necessary, and its "onboard" design and included hardware makes for easy, convenient mounting adjacent to batteries both inside and away from vehicles. Additional features include: 1.5-amp trickle charge rate, an LED charge indicator, reverse-hookup protection, molded plastic case and short leads for safety.
Designed to allow for safe charging of batteries used with RV, street rods, classic cars, mototcycles and snowmobiles, as well as deep-cycle or most other commonly used lead-acid batteries, the Schumacher SE-1-12S Fully Automatic Onboard Battery Charger is a convenient accessory suitable for use with most any vehicle that experiences long storage periods between uses, or requires improved battery performance during cold weather. Light, rugged and compact, its low-profile "onboard" outer design and included mounting hardware allow for easy mounting close to, if not directly on your battery's outer housing. This makes it perfect for use as a dedicated trickle charger, although it can also to mounted away from your vehicle in the case of dedicated, stand-alone charge stations for batteries. Once mounted, with the permanent ring terminal connections made and the AC power cord properly connected to a grounded 120-volt outlet*, the SE-1-12S automatically switches between charge mode and maintain mode as necessary. The charger contains an easy-to-read LED indicators related to battery connection and charge state, and an electronic control circuit which safeguards against overcharging the battery ensuring that your stored battery is safely kept at proper levels and will be ready when you need it.
Additional features include: reverse hook-up protection that keeps power from flowing unless a proper connection exists; a 1.5-amp trickle charge rate; intentionally short battery leads and AC power cord that won't get tangled in moving engine parts; and a rugged molded plastic outer case.
Schumacher Electric Corporation (the "Manufacturer") warrants this battery charger for two (2) years from the date of purchase at retail against defective material or workmanship that may occur under normal use and care. If your unit is not free from defective material or workmanship, Manufacturer's obligation under this warranty is solely to repair or replace your product with a new or reconditioned unit at the option of the Manufacturer. It is the obligation of the purchaser to forward the unit, along with mailing charges prepaid to the Manufacturer or its authorized representatives in order for repair or replacement to occur.
Since 1947, Schumacher Electric Corporation has been leading change and driving performance to exceed its customers' expectations. Engineered patent pending technologies and award winning marketing allows Schumacher to be the brand of choice when it comes to portable power and battery charger/jump starter/maintainer/tester needs. Passion and commitment is the Schumacher way which shows as they are official supplier for chargers, jump starters and inverters for NASCAR.
* Not for use with ungrounded 2-pronged outlet adapters; ensure any extension cords used are grounded and are of sufficient AWG size.
